Two-Post Parking Lift
- Product Structure and Specification
- Product Configuration
1, An intelligent radar control system featuring Bluetooth wireless remote control, intuitive voice prompts, and a silent mode.
2, The parking space shall feature an ultrasonic scanning function before and during descent; descent is permitted only when no obstructions are present.
3, Features a manual and automatic lifting switch function; the lock button (emergency button) offers four functions: block lift, block down, mute,and power; a warning indicator light activates when the parking space is raised or lowered.
4, An electric unlocking device ensures smooth and safe operation of the equipment. A 14-stage fall-protection system provides comprehensive protection against unintended falls from the vehicle platform, thereby guaranteeing vehicle safety.
5, To prevent personnel or vehicles from accidentally entering safety detection devices, and to avoid accidents caused by personnel entering the equipment area while the equipment is operating, the system is equipped with under-voltage. phase-loss, over-current, and overload protection devices. In the event of phase loss or reverse phase in the power supply, the control circuitry automatically detects these conditions and prohibits equipment operation, thereby ensuring the overall safety of the equipment.
Suitable for parking in various settings, including enterprises, public institutions, office buildings, residential community management areas, hotels, guesthouses, and private residences. The support columns can adopt an N+1 configuration to optimize land use
6, An emergency power-off safety device that can trigger an emergency power cutoff during operation if safety hazards arise, thereby preventing the equipment from continuing to operate and safe guarding both the equipment and the vehicle.
7. The upper limit safety device prevents the vehicle from exceeding the height limit during ascent, thereby ensuring vehicle safety.
8, The low-level safety alarm device triggers an alert when the vehicle platform descends to within 30 cm of the ground level, thereby ensuring the safety of the operator.
- Equipment View
Part name
1. Pillar
2. Slide Table (Left and Right)
3. Side Beam (Left and Right)
4. Wave Plate
5. Upper Vehicle Plate
6. Rear cross beam
7.Control arm
8. Control box
9.Front leg
10. Rear legs
11. Oil pipe cover
12. Power unit
13. Electrical box
14. Cylinder
- Product Engineering Drawings
Technical requirement
I.The concrete strength grade shall be no less than Grade 250.
2. The depth of the base fixation shall be no less than 350 mm.
3. The surface unevenness of the concrete floor shall not exceed 5 mm.
4. For the base fixed section of the lifting machine, both the length and width shall be no less than 100 mm, and it shall be integrally connected to the surrounding foundation
5. If none of the above requirements are met, the ground must be rewatered
6. The setting time of newly placed concrete shall be no less than 28 days
Ready to Solve Your Parking Challenges and Maximize Space?
Partner with JiuRoad to transform your limited land into a high-efficiency, automated parking hub. From top-level design to seamless installation, our engineering team is here to provide a complete one-stop solution. Share your site conditions with us today, and let us create a custom layout tailored specifically for you.