EV Charging Solutions for Different Electric Vehicles
The transition to zero-emission transportation is not a one-size-fits-all endeavor. The energy requirements, battery architectures, and operational dwell times of a commercial electric transit bus are fundamentally different from those of a private passenger sedan.
At JiuRoad, we do not just build chargers; we engineer highly specific, vehicle-matched energy ecosystems. By aligning our hardware configurations—ranging from compact public AC pedestals to ultra-high-power Megawatt split DC systems—with your exact vehicle class, we guarantee maximum fleet uptime, optimized grid utilization, and maximized commercial revenue.
Empowering e-Mobility with Advanced DC EV Chargers
To maintain the relentless pace of commercial logistics and public transit, rapid energy transfer is non-negotiable. JiuRoad empowers the global e-Mobility sector through state-of-the-art Direct Current (DC) fast-charging infrastructure.
Our proprietary Dynamic Power Matrix Technology allows our master controllers to communicate directly with any vehicle’s Battery Management System (BMS). The charger continuously monitors the vehicle’s voltage and current demands, applying the energy transfer equation. By dynamically shifting power modules in real-time, our DC systems eliminate stranded power, allowing different classes of vehicles (e.g., an 800V Porsche and a 400V delivery van) to share the exact same charging hub simultaneously with mathematically perfect efficiency.
Full Protecion
Over/Under Voltage Protection, Overload Protection, Cuurrent Leakage Protection and so on
Multiple Connectors
Compatible with all electric vehicles through CCS1, CCS2, GB/T, CHAdeMO, and NACS connectors
IP55/IP65 Protection Degree
IP55/IP65 Waterproof and Dustproof for outdoor use
Original Core Control Board
design, manufacture, and inspect by ourselves
OCPP Platform
OCPP1.6 is stanard, and the OCPP2.0 is upgradeable
Dynamic Power Allocation
Ensure optimized power distribution across multiple vehicles
Bus Charging Solution
- The Challenge: Municipal eBuses carry enormous battery packs () and run strict, tightly scheduled daily routes.
- The JiuRoad Solution: For overnight depot charging, we deploy our massive
Split DC Systems(e.g., ) connected to dozens of intelligent dispensers, allowing for low-stress, sequential charging of the entire fleet. For end-of-route opportunity charging, we provide ultra-fast integrated hubs to rapidly inject into the bus during a driver’s 15-minute layover.
Heavy-duty Truck Charging Solution
- The Challenge: Class-8 electric semi-trucks require terrifying amounts of raw energy to maintain intercity freight schedules, demanding sustained peak current without thermal failure.
- The JiuRoad Solution: Engineered for maximum durability, our heavy-duty solutions utilize
Liquid-Cooled DC Cablescapable of pushing continuous currents. We integrate large-scale power cabinets directly into logistics hubs, ensuring massive tractor-trailers reach an 80% State of Charge () fast enough to meet strict supply chain turnaround times.
Light Commercial Vehicle Charging Solution
- The Challenge: Last-mile delivery fleets (vans and box trucks) load packages in tight depot environments where space is at a premium.
- The JiuRoad Solution: Our footprint-optimized
160kW to 240kW Integrated Dual-Gun DC Chargersfit perfectly between loading warehouse bays. As the vans are loaded with cargo, they simultaneously receive a rapid charge, completing their replenishment in the exact time it takes to fill the vehicle with boxes.
Passenger Car Charging Solution
- The Challenge: Private EV owners demand a frictionless, highly reliable, and rapid “gas station-like” experience at highway service stations and retail plazas.
- The JiuRoad Solution: A combination of our
120kW/240kW Highway Superchargersand ourAdvertising DC EV Chargers. These units feature wide voltage ranges, seamless RFID/Credit Card POS integrations, and automated dynamic power splitting (), efficiently handling high passenger traffic volumes.
Special Vehicles Charging Solution
- The Challenge: Mining dump trucks, airport Ground Support Equipment (GSE), and port Automated Guided Vehicles (AGVs) operate in extremely harsh, heavily vibrating, and dusty industrial environments.
- The JiuRoad Solution: We deploy bespoke, rigorously tested IP55/IK10 rated DC chargers equipped with extreme internal dust filtration, specialized voltage curves tailored to industrial battery chemistry, and heavy-duty mechanical casing capable of surviving 24/7 operational abuse.
Critical Factors in Charging Solutions for Different Vehicles
| Feature/Vehicle Type | Bus / Coach | Heavy-duty Truck | Light Commercial Vehicle | Passenger Car | Special Vehicles |
|---|---|---|---|---|---|
| Car’s Battery Capacity | 200-500kWh | 400-1000+kWh | 50-150kWh | 40-120kWh | 100-1000kWh |
| Charger Power Needs | 120-360kW | 360-1000kW | 60 – 150 kW | 7-180kW | 60 – 600 kW |
| Typical Scenarios | Urban buses, long-distance passenger transport | Ports, mines, trunk logistics | Urban delivery, logistics vehicles | Private charging, public charging | Engineering vehicles, street sweepers, airport vehicles |
| Charging Characteristics | Overnight centralized charging + en-route fast charging | High-frequency fast charging, liquid-cooled guns, stable and safe | Frequent operation, flexible scheduling | Cost-sensitive, wide coverage | Customized requirements, specialized interfaces |
| Recommended Solution | DC 120/180/240/360 kW cluster fast chargers | DC 360/600/720 kW ultra-fast charging solution | DC 60–160 kW chargers | AC 7/11/22 kW; DC 60–180 kW | Customized DC 120–600 kW solutions |
DC Fast Charger Case Studies
Jiuroad CHG has successfully completed 575,000 EV charger projects globally, helping businesses and communities enhance their electric vehicle infrastructure with reliable DC charging stations. Our expertise ensures you receive top-notch support and competitive EV DC fast charger prices, optimizing both performance and cost-effectiveness.
FAQ
Can one JiuRoad DC fast charger serve both passenger cars and heavy commercial trucks?
Yes. Our DC chargers feature ultra-wide output voltage ranges (typically ). When a passenger car (400V) unplugs and a heavy truck (800V+) plugs into the same dispenser, the charger’s intelligent DSP dynamically adjusts the output voltage and current to perfectly match the new vehicle’s BMS.
How do you manage the grid limit when 50 delivery vans plug in at once?
We utilize Advanced Cluster Load Management via our CSMS cloud backend. You set an absolute grid limit, and the system intelligently throttles the chargers:
This ensures all vans are charged sequentially or at lowered output by morning, without tripping the depot’s main circuit breaker.
Do I need different cable connectors for different vehicle brands?
Global regions have different standards. JiuRoad manufactures customized dispensers equipped with the specific connector types required by your local vehicle fleet, including CCS1 (North America), CCS2 (Europe/Global), NACS (Tesla standard), CHAdeMO, or GB/T (China). We often provide dual-cable units (e.g., CCS2 + CHAdeMO) to maximize your station’s compatibility rate.
Ready to Build Your Next-Gen Charging Network?
Connect with our engineering and sales experts for a customized, one-stop solution proposal.